Understanding the technical details of how a decanter centrifuge works and having resources available to best maintain and repair centrifuge equipment is critical. What sets Centrisys/CNP apart as a world-class OEM decanter centrifuge manufacturer is our ability to leverage unprecedented experience and expertise to optimize centrifuge equipment around the globe. Delivering rapid, lifelong service for any brand of centrifuge equipment anywhere, our team minimizes costly downtime with service you can count on when you need it most.
The Centrisys/CNP team understands that not all centrifuge repair and service is the same. We understand that any shut down due to a centrifuge malfunction or inaccessible spare part may result in an emergency situation. Given the multiple shifts most customers run each day, decanter centrifuges must run at peak efficiency during all operational hours.
We’ve put together a helpful checklist below with 11 considerations for selecting the best decanter centrifuge repair facility so that you can be prepared next time you need to select the best service support. Let’s dive in...
Does the repair facility have sufficient space to repair correctly and safely? Floor and overhead space should be part of this consideration. Is there enough space to thoroughly inspect, clean, and measure the decanter centrifuge and its parts? There must be ample room in the facility to view and analyze the reasons for equipment failure.
A key measure of enough space in a decanter centrifuge repair facility is if a centrifuge skid system or a full centrifuge trailer system can be opened and repaired safely in the shop.
Repair facility square footage(and aerial square footage for the use of cranes) is a key enabler in providing ample room to inspect, measure, and clean every piece of equipment to either determine the reason for failure or properly repair equipment.
Does the decanter centrifuge repair facility maintain an up-to-date International Organization for Standardization (ISO) certification? You might ask, “why is this important?” ISO certification certifies that the processes and documentation have met all of the standardization and quality assurance requirements. ISO is an independent, non-governmental organization that develops standards to ensure the quality, safety, and efficiency of products, services, and systems.
Centrisys/CNP is ISO 9001:2015 certified, which specifies requirements for a quality management system to demonstrate an ability to consistently provide products and services that meet customer and regulatory requirements, and enhance customer satisfaction through the practical application of systems and processes.
Essentially, ISO standards are in place to ensure consistency, and decanter centrifuge repair facilities with current ISO certification and annual inspection have taken the time and made an investment to ensure they provide the highest level of quality and service.
Does the decanter centrifuge repair facility have bonding and liability insurance? Liability insurance protects all parties’ interests in the event of a mistake, accident, or work stoppage issue that may occur during the course of operations. In short, liability insurance covers damage, injuries, and other problems that could happen during the repair.
Surety bonds are also widely used in the construction industry and ensure that a project will be finished. They are designed to certify that a business acts in accordance with certain laws, and if the terms are broken, the harmed obligee can make a claim on the surety bond to recover losses incurred.
In the same line as ISO certification and liability insurance, it is important to know if a decanter centrifuge repair facility has a dedicated quality control department?
Quality assurance is achieved by establishing steps and procedures that require team members to implement a number of checks and balances before the completion of a project is approved.
Quality-control processes ensure consistency and safety, potentially eliminating unnecessary costs and reducing the likelihood of liability claims and lawsuits. It is a vital element to providing high-quality products and services that exceed customer expectations. Specifically, Centrisys/CNP’s quality control processes, which include the tracking of incoming components and outgoing equipment.
Below is a list of a few questions you should ask related to balancing equipment:
Balancing equipment at high speeds, as you can imagine, is not advised without proper protection and protocols. This is why at Centrisys, we’ve created an innovative approach with our state-of-the-art balancing bunker.
Centrifuges sent to Centrisys for repair or rebuild and then require balancing are done in our centrifuge balancing bunker. This dedicated shop space provides the necessary safety and protection of employees and customers who come to witness the operation. It not only provides for noise reduction during high-speed balancing, but it affords a much-needed measure of safety for our operators and service technicians.
Below is a list of a few questions you should ask related to the use of overhead cranes:
There are many options to lift and move heavy equipment around a repair shop, but the most efficient and safe way is by using cranes. Overhead cranes have higher loading and unloading capabilities and can lift a wider variety of equipment. They are essential when it comes to the assembly and disassembly of the centrifuge during a repair. If a repair shop has invested in overhead cranes, they have invested in both the most efficient process of centrifuge service and repair, as well as the safety of their employees. Centrisys/CNP currently has over 25 cranes in all of its service shops ranging from 15-ton to half-ton jib cranes. All of the company’s cranes are certified and inspected annually by a third-party crane manufacturer. A third party safety trainer performs regular employee crane training.
Are the centrifuge repair and repair parts guaranteed and covered under standard warranties? Centrisys/CNP offers standard parts warranties for OEM and centrifuge parts manufactured at Centrisys (typically, six months is the standard).
It is crucial a decanter centrifuge repair facility maintain a spare parts warehouse and distribution for OEM and aftermarket centrifuge parts inventory. This prevents a customer from having to wait a significant amount of time to receive an essential part for a decanter centrifuge repair.
Centrisys/CNP’s repair facility features a 20,000 square-foot parts warehouse and distribution center with over $9M of centrifuge parts in-stock. Standard OEM centrifuge parts, ancillary equipment, and other technical items are stocked to minimize centrifuge downtime, including the following centrifuge parts:
Incorporating innovative ways to utilize technology to support customers’ spare parts replacement and repair needs is an incredibly beneficial attribute to look for in a decanter centrifuge repair facility.
It's critical that a centrifuge repair facility can determine if the part is worn to the point of repair or if a new replacement is the best option. A quality centrifuge repair facility can evaluate the parts damage and decide what the next step of the repair should be to keep the centrifuge running for optimal use.
For over 30 years, Centrisys’ mechanical engineers have used CAD programs and SOLIDWORKS to analyze wear patterns on both the worn part and the centrifuge. This type of thorough analysis will optimize your process and extend the life of the centrifuge.
Centrisys also maintains a Centrifuge Parts Design Library – a turn-key SOLIDWORKS resource for decanter centrifuge parts designed and produced at Centrisys. Our centrifuge parts library has been in development since 1994 and includes parts, components, and ancillary equipment from new, re-engineered, reverse engineered, and optimized for all makes, models, and years of decanter centrifuges.
Read more on 4 Innovative Ways Centrisys Supports Centrifuge Parts Replacement here.
Does the decanter centrifuge repair facility offer in-house centrifuge machining, and welding capabilities for certified welders in-house? These services help ensure quality control and production, prioritizing from design through final product.
Likely one of the most important attributes of all is that your decanter centrifuge repair facility employs dedicated engineers and specialists. Below is a list of a few questions you should ask related to the service support team.
As a manufacturer, the Centrisys/CNP team has intricate knowledge of every component of the entire centrifuge and system, with the engineering knowledge to develop solutions when service, repair, and parts replacement needs occur.
Also, Centrisys/CNP offers a formal training program and works closely with its local technical college (Gateway Technical College) to ensure the highest level of education and training for all decanter centrifuge service technicians.
As a customer, you need to know all your options to make an informed decision about if, when, and how to repair a decanter centrifuge. Selecting the best decanter centrifuge facility that offers reputable and knowledgeable technicians shouldn’t be overwhelming.
Do you have questions about service, repair, or parts for a decanter centrifuge? Contact the experts at Centrisys/CNP today.